Non-ferrous separators

 

Checklist non-ferrous separators for inquiries   (11 KB)

 

We manufacture non-ferrous separators with different neodymium magnet systems with eddy current working principle: 

Centric rotors for demanding applications

Excentric rotors

All systems are suitable for heavy duty operation.

 

The mode of operation is based on the principle of induction. A quickly rotating magnetic pole system induces eddy currents in the conductive nf-parts at a high frequency. They themselves produce magnetic fields of the same polarity towards the magnetic rotor which leads to the repulsion of nonferrous parts.

Apart from the well-proven conventional iron separation WAGNER MAGNETE as one of the first enterprises has concentrated on the field of separation of non-ferrous metals like aluminium and copper. The applications of WAGNER nonferrous separators (nf-separators) are numerous and diverse. Almost all that is diminished by a shredder and sorted into various fractions or grain classifications contains nonferrous metals. The aim of the separation is either to recover valuable metals directly or to clean parent material for the reuse whereby both is of course possible.

Important examples are glass recycling or the recycling of wood, rubber and synthetic products. Here very high rates of reusability above all for basic materials are achieved. Valuable metals can be recovered from the automobile and electronic scrap recycling, recycling of old cables or from domestic waste and packing waste. The mentioned classification into equal grain sizes and a one-layer material feed if possible is the precondition of an efficient nf-separation. 

The eddy current separators are available in closed dustproof design and also with additional magnetic drum and vibration feeder.

For sticy materials we recommend the usage of our rotatin cleaning brushes. We provide several magnetic rotor systems with different number of pole and will help to select the best design for your application.

 

Type 0428/0-25

The reliable concentric full-rotor magnet system provides high depth-action and archieves best separation grades.

High-quality belt matierials and effective sealings are the reason for high realibility. 

Data sheet non-ferrous separator 0428   (1.299 KB)

 

Type 0428/1-25 with neodymium permanent magnetic drum

The additional neodymium magnetic drum removes residual iron from the material flow and therefore protects the belt from wear-out.

This compact FE/NF separator kombination works exclellent for electronics waste recycling and substitute fuel cleaning. 

Data sheet non-ferrous separator 0428   (1.299 KB)

 

Type 0429-37

The standard eddy current unit with excentric rotor system. Dimensions are quite similat to type 0428.

Different pole systems with working widt up to 1500 mm for standard applications with particle sizes over 10 mm. 

Data sheet non-ferrous separator 0429   (1.300 KB)

 

Type 0429-49

Eddy current separator with big excentric rotor, high magnet rotor volume and high number of poles. Optimized for high throughput and materials with particle size over 5 mm. 

Data sheet non-ferrous separator 0429   (1.300 KB)

 

Type 0429 Mobil

Hydraulic driven unit especially designed for mobile shredders and sieving machines.